Concentré Shinobi Ultimate 30ml

Warning:

This concentrate cannot be vaped directly; it is designed to be diluted in a DIY base to which you can add nicotine boosters if desired. Never use it directly.

Dosage:

It is recommended to use about 10% of concentrated flavor if diluted in a neutral 50/50 PG/VG base.

• For a 50 PG/50 VG base: 10% or 30 drops for 10 ml of base.
• For a 30 PG/70 VG base: 15% or 45 drops for 10 ml of base.
• For a 20 PG/80 VG base: 18% or 55 drops for 10 ml of base.
• For a 100 VG base: 20% or 60 drops for 10 ml of base.

There are two methods for measuring flavor concentrates:

1. By the number of drops.
2. By percentage, measured in milliliters.

Note: 1 ml of concentrate equals 30 drops. For instance, for a 5% dosage in a base, you'll need 5 ml per 100 ml, or 0.5 ml (15 drops) per 10 ml.

Steeping:

The recommended steeping time varies depending on the base composition:

• 70 PG/30 VG: 4 days.
• 50 PG/50 VG: 4 days.
• 30 PG/70 VG: 4 to 5 days.
• 100 VG: 6 days.

Features:

• Composition: food-grade flavorings.
• 10 ml flexible bottle with tamper-evident ring, childproof cap, tactile triangle for visually impaired users, ingredients, expiration date, and batch number.
• Origin: French manufacturing.

Storage:

Store between 4 and 16°C. This concentrate can be kept for at least one year in its original packaging. Compliant with Regulation 1334/2008/EC.

Preparing your e-liquid:

Required Ingredients:

• A ready-to-use base.
• One or more flavor concentrates.
• Optional: an additive (to adjust sweetness, acidity, or add a candy-like effect, etc.).

Necessary Equipment:

• A 10 to 30 ml syringe for the base.
• A 1 ml syringe for the flavor concentrates.
• Plastic or glass bottles of 5 ml, 10 ml, or 30 ml.
• Latex gloves.
• Protective goggles.

Preparation Steps:

1. Wash your hands and set up a clean workspace away from children.
2. Using a syringe or pipette, fill an empty bottle with the ready-to-use base (e.g., for 10 ml of e-liquid: add 8 ml of base, leaving 2 ml for the flavor and additives).
3. When handling a nicotine-containing base, use gloves and protective goggles.
4. Shake the flavor bottles before use.
5. Add the recommended amount of flavor concentrate (refer to dosage instructions).
6. If necessary, add an additive.
7. Shake the bottle vigorously for 10 to 20 seconds and let it sit to allow the flavors to develop.
8. Wash your hands again and clean your equipment and workspace.
9. Write down your recipe to reproduce or share it later.

Steeping:

Steeping allows the flavors to fully integrate into the e-liquid base. This process requires:

• A minimum of 15 days, or even several weeks, for tobacco flavors.
• A minimum of 48 hours for other flavor types.

To optimize the result, shake the bottle after preparation and daily. Note that the higher the vegetable glycerin content, the longer the steeping time required.

Tasting:

Once steeping is complete, your e-liquid is ready to be enjoyed. If the flavor is too weak, add a few more drops of concentrate and let it rest for at least 48 hours. If the flavor is too strong, dilute it with additional base.

• Overflavored: add more base to dilute.
• Underflavored: add a few more drops of concentrate.

Tips:

• Start with a single flavor before experimenting with mixes.
• Additives are optional and potent; use them sparingly (1% to 3% of the mix).
• Label your creations with essential details (flavors, dosage, nicotine level, date of preparation).
• For new recipes, use 10 ml bottles but with reduced volumes (5 ml) to make adjustments easier.
• Respect the steeping time. To accelerate it, you can add a drop of white vinegar or leave the bottle open for a few hours daily, shaking occasionally to facilitate oxidation.

Unleash your creativity and customize your vape with the Shinobi Ultimate Concentrate 30ml by A&L!